High Risk

Licence to operate a boom-type elevating work platform (11 metres or more)

TLILIC0005

This unit specifies the skills and knowledge required to safely operate a boom-type Elevating Work Platform (EWP) where the length of the boom is 11 metres or more in accordance with all relevant legislative requirements. Competence in this unit, does not in itself result in a Risk Work Licence (HRWL) to operate this plant.

Boom-type elevating work platform means a telescoping device, hinged device, or articulated device, or any combination of these, used to support a platform on which personnel, equipment and materials may be elevated.

A person performing this work is required to hold a boom-type elevating work platform HRWL.

You will learn to
  • Plan for the work/task
  • Prepare for the work/task
  • Perform work/task
  • Pack up

Your requirements
You MUST be over 18 to undertake this training

 

Licence to Operate a Forklift Truck

TLILIC0003

This unit specifies the skills and knowledge required to operate a forklift truck safely in accordance with all relevant legislative requirements. Competence in this unit, does not in itself result in a HRWL licence to operate this plant.

Forklift truck means a powered industrial truck equipped with lifting media made up of a mast and an elevating load carriage to which is attached a pair of fork arms or other attachments that can be raised 900 mm or more above the ground, but does not include a pedestrian-operated truck or a pallet truck.

A person performing this work is required to hold a forklift truck High Risk Work Licence (HRWL).

This unit requires a person operating a forklift truck to:
  • Plan for the work/task
  • Prepare for the work/task
  • Perform work/task
  • Pack up
Your requirements
You MUST be over 18 to undertake this training

 

Licence to Perform Dogging

CPCCLDG3001

This unit specifies the skills and knowledge required to safely perform dogging work. Dogging consists of the application of slinging techniques to move a load, including the selection and inspection of lifting gear, and the directing of a plant operator in the movement of a load when the load is out of sight of the operator.

Dogging work is conducted in the construction industry and other industries where loads are lifted and moved using cranes or hoists.

Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry meets this requirement.

Competence in this unit does not in itself result in a licence. A licence is obtained after competence is assessed under applicable Commonwealth, state or territory work health and safety (WHS) regulations.