Mining and Construction Courses

tadalafil australia

Conduct Civil Construction Excavator Operations

RIIMPO320F

RIIHAN308F Load and Unload Plant is a pre-requirement.
This unit describes a participant skills and knowledge required to conduct civil construction excavator operations in Civil construction. This unit is appropriate for those working in operational roles. This course includes blended learning involving theory and practical components and runs for 2 days. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Supplied PPE include; ear plugs, riggers gloves, hard hat, high visual vest and safety glasses. Replacement PPE is available for purchase from the front office.

Conduct Civil Construction Skid Steer Operations

RIIMPO318F

RIIHAN308F Load and Unload Plant is a pre-requirement.
This unit describes the skills and knowledge required to conduct civil construction skid steer loader operations in civil construction. This unit is appropriate for those working in operational roles. This course includes blended learning involving theory and practical components and runs for 2 days. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors.
Students are required to wear the appropriate PPE.
Supplied PPE include; ear plugs, riggers gloves, hard hat, high visual vest and safety glasses. Replacement PPE is available for purchase from the front office.

Conduct Wheeled Loader Operations

RIIMPO304E

This unit describes the skills and knowledge required to operate and shift loads using wheel loader operations.
Students will be provided with a logbook on day 1 of training and will be required to complete a minimum of 40 hours of practical prior to attending day 2 of training. 
This unit applies to those working in site-based roles.

Enter and Work in Confined Spaces

RIIWHS202D

This course covers working in an enclosed or partially enclosed space for work or inspection purposes. Entry and Exit procedures, assessment of risk, how to operate safely in a confined space which is at atmospheric pressure during occupancy. Use of Breathing Apparatus, harnesses, and retrieval equipment is all part of this 2 day course. Students are required to wear the appropriate PPE. Supplied PPE include; ear plugs, riggers gloves, hard hat, high visual vest and safety glasses. Replacement PPE is available for purchase from the front office.
This is the nationally recognised course.

Health & Safety Representative / Health & Safety Consultation

HSR/HSC

SafeWork NSW have developed and approved a standard five (5) day HSR/HSC initial training course for delivery in NSW. Course materials are approved by SafeWork NSW.
The HSR/HSC training course is delivered in partnership with Work Cover NSW RTO 90500. 

Licence to Operate a Boom-Type Elevating Work Platform (boom length 11 meters or more)

TLILIC0005

This unit specifies the skills and knowledge required to safely operate a boom-type elevating work platform where the length of the boom is 11 metres or more. Boom-type elevating work platform means a telescoping device, hinged device, or articulated device, or any combination of these, used to support a platform on which personnel, equipment and materials may be elevated. A person performing this work is required to hold a boom-type elevating work platform high risk work (HRW) licence. This unit requires a person operating a boom-type elevating work platform to plan the work, conduct routine checks, set up elevating work platform, operate elevating work platform, and shut down and secure elevating work platform.
You must be over 18 years of age and are required to bring 100 points of ID with at least one being driver's licence, proof of age card or passport identification.
If you live outside NSW but work in NSW you may require an exemption.
Please contact the friendly administration staff if you are unsure of what identification you require or you require an exemption.

Students are required to wear the appropriate PPE. Supplied PPE include; whistle, ear plugs, riggers gloves, hard hat, high visual vest and safety glasses. Replacement PPE is available for purchase from the front office.

Licence to Operate a Boom-Type Elevating Work Platform (boom length 11 metres or more)

VOC

Licence to Operate a Bridge and Gantry Crane

TLILIC0006

CPCCLDG3001A Licence to Perform Dogging is a pre-requisite. 
This unit specifies the skills and knowledge required to operate bridge cranes and gantry cranes safely.
This unit applies to the activities of a person operating bridge crane or gantry crane that is:
controlled from a permanent cabin or control station on the crane, or 
remotely controlled and having more than 3 powered operations

A person performing this work is required to hold a bridge and gantry crane HRWL.
This unit requires a person operating a bridge crane or gantry crane to:
plan for the work/task
prepare for the work/task
perform work/task
Pack up

Licence to Operate a Forklift Truck

TLILIC0003

Learn the theory and practical skills to gain your licence to operate a forklift truck. Course includes 2 days theory and practical training and 1 day Safework NSW Licence High Risk Assessment.
You must be over 18 years of age and are required to bring 100 points of ID with at least one being driver's, proof of age card or passport identification.  If you live outside NSW but work in NSW you may require an exemption.
Please contact the friendly administration staff if you are unsure of what identification you require or you require an exemption.
Students are required to wear the appropriate PPE. Supplied PPE include; ear plugs, riggers gloves, hard hat, high visual vest and safety glasses. Replacement PPE is available for purchase from the front office.

Licence to Operate a Non-Slewing Mobile Crane (greater than 3 tonnes capacity)

TLILIC0008

 
Dogging is a prerequisite for this unit of competency.
Nationally Recognised Safework NSW Non Slew Mobile Crane Greater than 3 Tonnes Capacity, that incorporates a boom or jib which includes articulated type mobile cranes and locomotive cranes, but does not include vehicle tow trucks assessment. 
4 days of training and 1 day of High Risk Assessment including practical training and assessment.
Students are required to bring 100 points of ID satisfying Safework NSW requirements  with at least one being driver's licence or proof of age card or passport identification. If you live outside NSW but work in NSW you may require an exemption.
Please contact the friendly administration staff if you are unsure of what identification you require or if you require an exemption.
Students are required to wear the appropriate PPE.
Supplied PPE include; ear plugs, riggers gloves, hard hat, high visual vest and safety glasses. Replacement PPE is available for purchase from the front office. 

Licence to Operate a Slewing Mobile Crane (up to 60 tonnes)

TLILIC0013

Dogging is a prerequisite for this unit of competency
If you are interested in working with cranes, this course will give you a good knowledge of working with 60 tonne cranes.
You will learn about:
•Pre-operational checks
•Site/job planning
•Setting up the crane
•Operating the crane
•Shut down procedures
•Special operations.
4 days of practical and theory training and 1 day Nationally Recognised Safework NSW C6 assessment. 
You must be over 18 years of age and are required to bring 100 points of ID with at least one being driver's licence or proof of age card or passport identification. If you live outside NSW but work in NSW you may require an exemption.
Please contact the friendly administration staff if you are unsure of what identification you require or if you require an exemption.

Students are required to wear the appropriate PPE.
Supplied PPE include; whistle, ear plugs, riggers gloves, hard hat, high visual vest and safety glasses. Replacement PPE is available for purchase from the front office.

Licence to Perform Dogging

CPCCLDG3001A

Learn whistle codes, how to tie ropes, slings, and more. 4 days training and 1 day HR assessment. Practical components of training and assessment are also required. This course includes significant theory components including calculation and mathematical skills. Nationally Recognised Training that includes the NSW Workcover assessment. You must be over 18 years of age and are required to bring 100 points of ID with at least one being driver's licence or proof of age card or passport identification.
If you live outside of NSW but work in NSW you may require an exemption.
Please contact the friendly administration staff if you are unsure of what identification you require or you require an exemption.Students are required to wear the appropriate PPE. Supplied PPE include; whistle, ear plugs, riggers gloves, hard hat, high visual vest and safety glasses. Replacement PPE is available for purchase from the front office.

Load and Unload

RIIHAN308F

This unit describes the skills and knowledge required to load and unload plant.
This unit applies to those working in site-based roles.
Prior to performing this activity, skills and knowledge need to be developed for the individual plant. This can be achieved through completing the equivalent operator unit or being assisted by someone who has this knowledge. 

Operate a Bridge and Gantry Crane

RIIHAN305D

CPCCLDG301A Licence to Perform Dogging is a pre-requirement.
This unit describes a participant’s skills and knowledge required to operate a gantry or overhead crane in the Resources and Infrastructure Industries.
This unit is appropriate for those working in operational roles.
Work Health and Safety Act 2011 and Work Health and Safety Regulations 2011 no longer requires persons to hold a licence for the operation of a remote or pendant operated, Bridge and Gantry Crane with 3 or less powered operations.

Operate Elevated Work Platforms Under 11

EWPU11

This is the Yellow card course delivered for Elevated Work Platform Association of Australia. The course delivers theory and practical components of a Scissor Lift, Boom Lift and Trailer mount (cherry picker) for under 11 meters only.
Duty of care course for - all users, employers and owners of this equipment in the workplace.
This course is delivered in partnership with EWPA.

Perform Rescue From a Live LV Panel

UETTDRRF06B

This course covers the performance of rescue procedures from live Low Voltage apparatus, not
including overhead lines and underground cables in the work place.
It specifies the mandatory requirements of rescue from a live LV panel and how they apply in the context of transmission, distribution or rail work functions.

Prepare to Work Safely in the Construction Industry (White Card)

CPCCWHS1001

NSW Workcover approved WHS White Card Course is the course known as CPCCWHS1001 Prepare to Work Safely in the Construction Industry. This is the National Course. 
Students are required to bring 100 points of ID with at least one being driver's licence, proof of age card or passport identification.
If you live outside of NSW but work in NSW an exemption maybe required.
Minimum age is 14 years.
Please contact the friendly administration staff if you are unsure of what identification you require or you need an exemption.
Students will be provided with the required PPE and replacements PPE packs can be purchased from Robinson College.

Safe Machinery Operations

SMO

This course provides students with a refresher on the correct and safe use of machinery.
Students must have a current ticket in the required machinery.

WHS Documents for Beginners

WHSDB

This course is for people wanting a basic understanding of WHS documents in the workplace.
This is a non-accredited course.

Work Safely and Follow WHS Policies and Procedures

RIIWHS201D

In this unit a student's skills and knowledge that are required to work safely and follow WHS policies and procedures in the Resources and Infrastructure Industries are explained and demonstrated.
This unit is appropriate for those working or wanting to work in operational roles.
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information will be sourced during the delivery of this unit.

Work Safely at Heights

RIIWHS204D

This course teaches a participant skills and knowledge required to work safety at heights in the Resources and Infrastructure Industries. 
This unit it appropriate for those working in operational roles where they are required to perform work at heights. 
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Students are required to wear the appropriate PPE.
Supplied PPE include; ear plugs, riggers gloves, hard hat, high visual vest and safety glasses. Replacement PPE is available for purchase from the front office.
https://melbourne-chemist.net/cialis.php