Conduct Manual Tasks Safely
HLTWHS005
This unit describes the skills and knowledge required to recognise potentially hazardous manual tasks‚ and then to prepare for and complete those tasks in a safe manner.
This unit applies to all workers involved in manual handling tasks.
The skills in this unit must be applied in accordance with Commonwealth and State/Territory legislation, Australian/New Zealand standards and industry codes of practice. The Hazardous manual tasks code of practice applies to this work.
This unit applies to all workers involved in manual handling tasks.
The skills in this unit must be applied in accordance with Commonwealth and State/Territory legislation, Australian/New Zealand standards and industry codes of practice. The Hazardous manual tasks code of practice applies to this work.
Enter and Work in Confined Spaces
RIIWHS202E
This unit describes the skills and knowledge required to enter and work in confined spaces in the resources and infrastructure industries.
It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of work outcomes.
You will learn how to
Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.
Note: The terms Occupational Health and Safety (OHS) and Work Health and Safety (WHS) are equivalent and generally either can be used in the workplace. In jurisdictions where the National Model WHS Legislation has not been implemented RTOs are advised to contextualise the unit of competency by referring to the existing State/Territory OHS legislative requirements.
It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of work outcomes.
You will learn how to
- Plan and prepare for working in confined space
- Work in confined space
- Exit confined space
- Clean up
Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.
Note: The terms Occupational Health and Safety (OHS) and Work Health and Safety (WHS) are equivalent and generally either can be used in the workplace. In jurisdictions where the National Model WHS Legislation has not been implemented RTOs are advised to contextualise the unit of competency by referring to the existing State/Territory OHS legislative requirements.
Perform Rescue From a Live Low Voltage Panel
UETDRMP007
This unit involves the skills and knowledge required to perform a rescue from live low voltage (LV) electrical apparatus in an electricity supply industry (ESI) environment. This does not include overhead lines and underground cables.
It includes the organisational workplace requirements for the inspection and use of live LV panel rescue equipment, and how it applies to ESI workers to meet work health and safety (WHS)/occupational health and safety (OHS), mobility and mutual aid requirements.
Note: Those holding an existing ESI or Electrotechnology qualification or equivalent meet the prerequisite unit requirements.
Refer to the UET Transmission, Distribution and Rail Sector Training Package Companion Volume Implementation Guide for equivalency definition.
The application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace.
Other conditions may also apply under state and territory legislative and regulatory licensing requirements which must be confirmed prior to commencing this unit.
Pre-requisite Units (included)
HLTAID009 Provide cardiopulmonary resuscitation
and
UETDREL006 Work safely in the vicinity of live electrical apparatus as a non-electrical worker
It includes the organisational workplace requirements for the inspection and use of live LV panel rescue equipment, and how it applies to ESI workers to meet work health and safety (WHS)/occupational health and safety (OHS), mobility and mutual aid requirements.
Note: Those holding an existing ESI or Electrotechnology qualification or equivalent meet the prerequisite unit requirements.
Refer to the UET Transmission, Distribution and Rail Sector Training Package Companion Volume Implementation Guide for equivalency definition.
The application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace.
Other conditions may also apply under state and territory legislative and regulatory licensing requirements which must be confirmed prior to commencing this unit.
Pre-requisite Units (included)
HLTAID009 Provide cardiopulmonary resuscitation
and
UETDREL006 Work safely in the vicinity of live electrical apparatus as a non-electrical worker
Prepare to Work Safely in the Construction Industry (White Card)
CPCWHS1001
This unit of competency specifies the mandatory work health and safety training required prior to undertaking construction work. The unit requires the person to demonstrate personal awareness and knowledge of health and safety legislative requirements in order to work safely and prevent injury or harm to self and others. It covers identifying and orally reporting common construction hazards‚ understanding basic risk control measures, and identifying procedures for responding to potential incidents and emergencies. It also covers correctly selecting and fitting common personal protective equipment (PPE) used for construction work.
Licensing, legislative, regulatory or certification requirements apply to this unit. Relevant work health and safety state and territory regulatory authorities should be consulted to confirm jurisdictional requirements.
• Participants must be over 14 years of age to complete this course.
• 100 points of original identification is to be brought with you on the day.
• Please Note: If you are a school student, please be aware you must provide an original copy of your birth certificate or a written statement on a school letterhead confirming your name and date of birth or the identity of the student has been verified by sighting a student ID card that contains the school crest/seal, your photo, your name and your date of birth.
No person can sit the course unless original identification as stipulated above, is provided to the
Safework NSW Assessor on the day of training.
Work Safely at Heights
RIIWHS204E
This unit describes the skills and knowledge required to work safely at heights in the resources and infrastructure industries.
It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of work outcomes.
You will learn to
Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.
Note: The terms Occupational Health and Safety (OHS) and Work Health and Safety (WHS) are equivalent and generally either can be used in the workplace. In jurisdictions where the National Model WHS Legislation has not been implemented RTOs are advised to contextualise the unit of competency by referring to the existing State/Territory OHS legislative requirements.
It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of work outcomes.
You will learn to
- Identify work requirements
- Identify work procedures and instructions
- Access and install equipment
- Perform work at heights
- Clean up work area
Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.
Note: The terms Occupational Health and Safety (OHS) and Work Health and Safety (WHS) are equivalent and generally either can be used in the workplace. In jurisdictions where the National Model WHS Legislation has not been implemented RTOs are advised to contextualise the unit of competency by referring to the existing State/Territory OHS legislative requirements.